Self-Cleaning Pulse Jet Bag Dust Collector and
Baghouse
|
|
|
|
Baghouse
dust collectors are suited for woodworking,
grinding, sand blasting, paper dust, grains,
plastics, furnaces, welding, and most other dust collection
applications.
ULTRA-FLOW™ advanced
technology collectors are used successfully in
applications where you wouldn't dare use
conventional designs.
Guaranteed results;
ULTRA-FLOW™ vs. contemporary
design pulse-jet dust collectors:
80-90% more efficient
15-25% lower initial cost
50-80% lower operating costs
25-35% less power consumption, power
utilities are
applying more and more pressure to
conserve energy
25-30% smaller collector
Trouble Free Operation
25 years of proven technology
Available
in small (low-cost), medium and large size models.
QAM also
offers important accessories such in-line
spark arrester
and
duct cleaner to
prevent fires and explosions.
|
Ultra-Flow™ Baghouse
Dust Collector
15:1 filter ratio
carbon dust
no HEPA needed
|
|
Advanced Technology Compared to Conventional Designs
| Woodworking 20,000 CFM |
ULTRA-FLOW™ |
Contemporary Collector |
| Length |
136" |
135" |
| Width |
72" |
115" |
| Height (Collector Only) |
120" |
120" |
| Height c/w Stand, Hopper |
222" |
240" |
| Weight (minus Stand) |
7700 lbs |
9480 lbs |
| # Bags |
84 |
256 |
| Fan Power required |
50 HP |
75HP |
| Air Consumption |
4.65 SCFM |
8.0 SCFM |
| Dust Emissions |
4 x 10-4 grains/cu.ft. |
66 x 10-4
grains/cu.ft. |
-
Forms a highly efficient filter cake, at air-to-cloth
ratios of up to 18:1
-
Runs at only 1.5-2.5 inches WC pressure drop. conventional
designs produce 4 to 8 inches WC, at much lower air-to-cloth
ratios.
-
1/3 the cleaning frequency required for conventional
designs
-
Supersonic nozzles, on pulse pipes, produce 3.6 times
more HP of energy to power the cleaning jet
-
Compressed air consumption is reduced by over 65%
-
27 times less dust penetration (puffing)
-
Bag life is 3-4 times higher than conventional designs
-
High Side & Central Inlets into a large dropout chamber
allow for ideal dust and gas distribution lowering any abrasive
tendencies and producing zero upward "can" velocity.
-
Perforated Baffles separate the inlet chamber from the
bag filter compartment (s) to handle impulsive and abrasive
dust loads.
-
Cleaning System Components are protected from wind and
weather elements by being mounted in a closed trough in
the center of the collector. This allows quick and easy
inspection servicing without precarious position for the
operating personnel.
-
Thousands of successful installations in woodworking,
welding fumes, grinding, carbon, cement, foundry, grain,
gypsum, lime, plastics, pharmaceutical, sawdust, sugar and
paper dust applications.
Specifications
Printable Brochure
Version (.pdf file)
|
