|
Oil Mist Collector, Oil Mist Eliminator,
Smoke Collector
The WM Series is the only Oil Mist Collector designed specifically
for water-based coolants in machining operations.
99.97% Efficient
Four Stage Filtration
-
Low velocity drop out plenum on inlet
-
Liquid fluidized bed constantly washes
down the collected mist and any light particulate.
Prevents gum formation.
-
Final Stage Oil Mist Eliminator
knocks out 99
% of mist before exiting the collector.
-
Optional HEPA filter on the outlet of
the mist collector
Patent Pending
|

|
Collect Mist from Wet Grinders, Wet Cutters, CNC Turning
Centers, etc
HIGH EFFICIENCY, without
the use of HEPA filters (costly to maintain)
RECOVERS & RECYCLES COOLANTS
Back to the Machining Center
MAINTENANCE – FREE & NO
FILTERS TO REPLACE; The entire system is based on mechanical
filtration and constant self-washing.
600, 1250, 2500 CFM, or any size in modules of 1250 &
2500 CFM
Rod Hanging Brackets or Floor Stand
The "WM" series mist collector is a design which specifically
overcomes the issues presented by water-based machining coolants.
Instead of an intricate path through a deep bed of fibers, the
intricate path is formed by a deep liquid bed, which is 6 to
10 inches high. The liquid is constantly renewed by adding water
to the mixture. By using a continuous wash down system and liquid
fluidized bed advanced technology, we prevent the evaporation
of the coolant and eliminate the formation of any gummy substance.
This makes the "WM" series mist collector totally non-clogging
and maintenance free. It can collect the solids and liquids
individually or in combination that are emitted from any machining
operation. Its fluidized bed can be modified to accept any type
of liquid machining fluid. HEPA after filters are also available
but rarely needed.
Printable Brochure Version (.pdf file)
Contact Us
|