Duct Cleaner, Booster for Dust
Collection Systems
|
This air duct cleaner functions similar to a
duct booster fan, keeping dust collection systems clean and safe.
|
-
Clean
Dust Drop-out in ductwork to dust collectors
-
Unplug blockages in pneumatic conveying
-
Easy solution to
boost low flow conditions in
ducts
-
Reduce
Fire and Explosion hazards in ducts
-
Clean
out dust accumulations in spark arrestors and other devices in airstreams
-
Simple duct cleaning mechanism
-
Simply insert in the duct section to retrofit an
existing system
-
Uses advanced pulse jet technology
-
Each pulse boosts air flow velocity by 2-4 times
-
Cleans up to 100 feet of duct
-
Available in a all duct sizes
|
Booster installed in a 64 inch duct
|
|
The BOOSTER is used to accelerate the flow velocity in
a ventilating duct up to 5,000-8,000 feet per minute, applying
advanced pulse jet dust collector
technology.
Safely propels the dust accumulated in the
duct toward the
dust collector.
Cleans 100 feet or so of duct work. Below, we have an outline
of the Booster - Duct Cleaner installed in a duct.
In a typical application, see above:
Initial duct velocity is 1500 FPM.
Dust is dropping to the bottom of the duct, causing a fire hazard.
A periodic 15 millisecond pulse of compressed air is blown down
the duct.
The duct velocity is boosted to 3600 FPM.
The dust is blown down the duct towards the dust collector.
Control of the Booster - Duct Cleaner
Two methods can be used:
- We use the output from one of the positions on the dust
collector's pulse sequencer, controlling the cleaning cycle
of the bag cleaning system, the length of pulse would be
typically 0.10 to 0.15 seconds.
- The duct cleaner can also be actuated by a manual push
button.
Contact Us
Printable Brochure
Version (.pdf file)
|
