Retrofit, Consultation for Baghouse Dust Collectors

90% of existing pulse-jet dust collectors are retrofit candidates.

• Increase efficiency and lower particulate emissions coming from the dust collector by 50% or more.

• Lower operating cost by 30-60%.

• Lower power consumption by 25-40%.

• Most economical approach, usually purchased in operating rather than capital budgets

• No risk. Modifications installed and running before invoice is due. No special requirements or training required.

Symptoms to look for:
1. Pressure drop over 3 inches water column across filter elements.
2. Particulate emissions at collector outlet are over 30 x 10^-4 grains per cu. ft. (it should be 4 x 10-4).
3. Filter element life is under 4 years.
 

The Problem: There are serious flaws in equipment design by all major baghouse dust collector suppliers.

The Solution: QAM’s exclusive Retrofit / Rebuild and consulting service. Apply ten year old proven advanced technology to the dust collection system, with over 500 units in service, to the conventionally designed dust collector. Alternatively, purchase one of the very few well designed advanced technology dust collector systems available today.

Consulting Service

Laboratory Testing Facility

QAM’s test facility will examine the bags for, presence of moisture or condensation, evidence of dust leaking or penetration to the clean side, oil in the media, permeability of the media, strength tested, type of dust in that application and it’s characteristics.

Call Today: 1-800-267-5585 toll-free
use this link for; E-mail Contact