Retrofit 90% of Existing Dust Collectors

Budget constraints & tough economic times? Retrofit your existing old technology dust collector to new advanced technology, guaranteed low cost & short payback.

90% of all existing dust collectors are retrofit candidates.

Retrofit NOW and get immediate Payback!

• Upgrade to best latest available technology
• Increase collection efficiency by at least 4 times/li>
• Reduce particulate emissions by 27 times
• Lower operating costs by 30-60%
• Increase bag or cartridge filter life 3 to 10 times
• Increase collector capacity up to 75%
• Most economical approach, from operating rather than capital budgets
• Attractive payback
• No risk
• See our Baghouse dust collector retrofits
• See our Cartridge dust collector retrofits

The Problem: There are serious flaws in equipment designed by all major baghouse and cartridge dust collector suppliers. Certain basic laws of physics and air dynamics were not considered in their product development. The main design flaw of continuous cleaning collectors of that is believed by designers that volume (flow in CFM) per filter element is solely a function of filter area. The truth is that it is related to cleaned filter.

The Solution: Quality Air Management's exclusive retrofit/rebuild service. applies 10+year-old proven Advanced Technology, with over 500 units in service, to the conventionally designed dust collector.

Problems to Correct:

• Poor bag or cartridge filter design; leaking, plugging (or blinding), excessive bridging, tears and ruptures.
• Poor Inlet Position and Air Distribution; abrasion problems, excessive dust loading, inefficient cleaning
• Fine dust hanging up in the filter is due to excessive upward "can" velocity
• Dust hanging up in cartridges due to improper sequencing control
• Poor Air Volume or Pressure to the Pulse Pipe; air-jet does not properly clean the filter, as low as only 10% of the filter gets cleaned
• Condensation in Filter Cake; caused by cooling of cleaning air jet, adversely affects media permeability
• Excessive use of compressed air to properly clean the filters

Laboratory Testing Facility

QAM’s test facility will examine the bags for, presence of moisture or condensation, evidence of dust leaking or penetration to the clean side, oil in the media, permeability of the media, strength tested, type of dust in that application and it’s characteristics.

Call Today: 1-800-267-5585 toll-free
use this link for; E-mail Contact