Ultra-Flow™ Cyclone Dust Collectors
Cyclone Collectors provide constant high performance at low horsepower requirements. The fan is located on the clean air side of the unit. Dry, heavy particles such as grit, chips, and other heavy particles are separated and collected before they can reach the fan, reducing the threat of loading or breakage, and avoiding unnecessary repairs and costly down-time. A top-mounted motor and blower are rotatable for easy relocation of the outlet duct. Cones may be rotated on their base for inlet location. The long cone design and high inlet velocity puts these cyclones in the "high efficiency" class. Cyclones have removed up to 99% of fine steel grinding and 99.9% of sawdust, by weight. Fine particles not separated by the cyclone unit are trapped by after-filters, which are optional on all models. Cyclones are recommended in polishing operations where it has been found that typical filter media becomes bridged because of the grease based rouges being used with polishing wheels.
